The AUTOkey system provides the convenience of standard radio frequency transmitters plus the security of programmable card access for long-range access control with supported distances up to 200 feet away. The stand-alone unit is programmed using a built-in keypad and audio feedback so a computer is not required. Transmitters can be restricted based on time zones and/or gate location.

If you own multiple vehicles and need to carry the identification device with you, our portable transmitters can be utilized. Or if the same vehicle is used on a daily basis, you can utilize our "visor" style. Mounted on the overhead visor in the car, or the convenience of placing the transmitter on a key chain so it is always with you, the operation is simple and the information secure.

FEATURES

• 4.2 million transmitter codes
• Battery backed, 365-day clock
• Built-in LED programmer
• Non-volatile memory to ensure database is retained
• Bulk transmitter entry & deleting
• Three relays
• Programmable relay times up to 250 seconds
• Lightning protection on inputs
• Event printer output
• Optional Remote Ground Plane Antenna
• Up to 8000 Cardholder Capacity

The CLIKcard utilizes a radio frequency transmitter to send the encoded information to the receiver. This is similar to your residential garage door opener except the system unlocks the gated entrance.

The CLIKcard supports read ranges in excess of 200 feet so the user can press the appropriate button prior to reaching the gate, and as the gate opens, continue to drive through. The advantage is the user will not have to stop, roll down a window and enter an entry code or use touch-style reader technologies to gain access. Rather, they simply press the button and the gate will open. The receiver is housed in a weatherproof, metal enclosure. The transmitters are available in a one- or two-button configuration.

The CLIKcard family is used in conjunction with our Telephone Entry System, the "Infinity Series", or integrated to any access control system. CLIKcard is available in a 26-bit industry standard output, just in case you already have an access control system and want the advantage of the long range RF technology. If the gated area has more than one entrance, a single transmitter (with two buttons) can be used to unlock up to three separate receivers.

HID is a leading manufacturer of Radio Frequency identification devices for access control, personal identification, asset management, and other control applications. HID has a vast array of identification cards (tags) and readers to accommodate most applications. Sentex Systems has partnered with HID to provide the majority of the product offering through our partnership distribution to create a one-stop shop environment.

If you would like specific brochures or specifications on the HID product line, click www.prox.com  for the complete product portfolio.

MOST COMMONLY USED RF READERS:

MiniProx Card Reader
A slim design that allows mounting on the interior of a building, door frame, or controlled parking entrances. The electronics are potted, making the reader weather resistant. Typical read ranges are three to five inches.

ThinLine Proximity Card Reader
Provides performance and reliability with a low-profile appearance. The industry standard sized switch plate enclosure eases installation and maintenance with the use of replaceable covers. Thin Line read ranges are typically between three to five inches.

ProxPro Proximity Card Reader
This item has become a standard in the access control industry because it has a six- to nine-inch read range and small enough to be architecturally attractive. The ProxPro is typically mounted on a single gang box and is designed for indoor or outdoor use.

MaxiProx Card Reader
Typically used for long range reading installations, the MaxiProx will support read ranges up to 24 inches, but varies depending on the ID card used. This version is ideal for parking entrances or corridor applications.

Passport^TM Technology is an evolutionary step in the creation of a simpler, more effective method of managing the entrances within a gated community or commercial environment. Until now, property managers have had to manage transmitters for the main gate, transmitters for the private residences, and even transmitters for parking entrances. This is cumbersome and costly. With our Passport^TM Technology, residential and commercial property management is now simplified by an innovative single transmitter solution.

Features:

• NEW to Passport: 1, 2 and 3-button remotes! Plus: a NEW mini remote!
• Total control with one remote - operate a multitude of access devices
• Ideal for gated communities, parking lots, multi-family housing, private residence gates and/or garage doors and commercial building warehouse doors
• The CPWR Receiver uses the Wiegand format which can be easily integrated with telephone entry and access control systems
• Freedom from interference via narrow band technology
• Compatible with all Chamberlain LiftMaster Security+® products
• Security+® provides a narrow band 390 MHz rolling code technology to deliver the highest level of protection against code duplication
• Compatible with HomeLink® System to open gates and garage doors
• Can turn on/off lights and appliances with optional 982LM light/appliance control